Skip to Content

Changes for page Power controller

Last modified by Mathias Larsen on 2026/09/24 21:21
From version 12.1
edited by Mathias Larsen
on 2026/05/25 16:46
Change comment: There is no comment for this version
To version 9.2
edited by Mathias Larsen
on 2026/05/25 13:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,7 +2,7 @@
2 2  
3 3  == Microcontroller Pinout ==
4 4  
5 -The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6
5 +The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
6 6  
7 7  
8 8  |=Physical pin|=Electrical pin|=(((
... ... @@ -34,8 +34,8 @@
34 34  |30|PA8|Digital output Enable buzzeer
35 35  |31|PA9|Digital output Enable brake light
36 36  |32|PA10|Input ASMS signal
37 -|33|PA11|CAN-BUS RXD
38 -|34|PA12|CAN-BUS TXD
37 +|33|PA11|CAN bus RXD
38 +|34|PA12|CAN bus TXD
39 39  |35|VSS|Voltage source: Ground
40 40  |36|VDD|Voltage source: Power (+3V3)
41 41  |37|PA13|SWDIO
... ... @@ -43,7 +43,7 @@
43 43  |40|PB3|Digital output: LED 3
44 44  |41|PB4|Digital output: LED 4
45 45  |42|PB5|Digital output: LED 5
46 -|43|PB6|Digital output: Enable Pump 1
46 +|43|PB6|Digital outpEnable Pump 1
47 47  |44|PB7|Digital output: Enable Pump 2
48 48  |45|PB8|Digital output: LED 6
49 49  |46|PB9|LED 7