Skip to Content

Changes for page Power controller

Last modified by Mathias Larsen on 2026/09/24 21:21
From version 13.1
edited by Mathias Larsen
on 2026/06/17 16:23
Change comment: There is no comment for this version
To version 9.2
edited by Mathias Larsen
on 2026/05/25 13:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,7 +2,7 @@
2 2  
3 3  == Microcontroller Pinout ==
4 4  
5 -The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6
5 +The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
6 6  
7 7  
8 8  |=Physical pin|=Electrical pin|=(((
... ... @@ -31,13 +31,11 @@
31 31  |25|PB11|Current 1 Internal components
32 32  |26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger 
33 33  |29|PB15|PWM: enable fan 2
34 -|30|PA8|Digital output Enable buzzeer(On the car it is Brake light)
35 -|31|PA9|(((
36 -Digital output Enable brake light(On the car it is the buzzer)
37 -)))
34 +|30|PA8|Digital output Enable buzzeer
35 +|31|PA9|Digital output Enable brake light
38 38  |32|PA10|Input ASMS signal
39 -|33|PA11|CAN-BUS RXD
40 -|34|PA12|CAN-BUS TXD
37 +|33|PA11|CAN bus RXD
38 +|34|PA12|CAN bus TXD
41 41  |35|VSS|Voltage source: Ground
42 42  |36|VDD|Voltage source: Power (+3V3)
43 43  |37|PA13|SWDIO
... ... @@ -45,7 +45,7 @@
45 45  |40|PB3|Digital output: LED 3
46 46  |41|PB4|Digital output: LED 4
47 47  |42|PB5|Digital output: LED 5
48 -|43|PB6|Digital output: Enable Pump 1
46 +|43|PB6|Digital outpEnable Pump 1
49 49  |44|PB7|Digital output: Enable Pump 2
50 50  |45|PB8|Digital output: LED 6
51 51  |46|PB9|LED 7