Changes for page Power controller

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,5 +1,53 @@
1		-|=Pin|=
2		-| |
3		-| |
	1	+
4	4
	3	+== Microcontroller Pinout ==
	4	+
	5	+The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
	6	+
	7	+
	8	+|=Physical pin|=Electrical pin|=(((
	9	+Description
	10	+)))
	11	+|1|VBAT|Power source from a backup battery if a RTC would be used (Connected to +3V3 in this case)
	12	+|5|OSC_IN|Clock input (8MHz oscillator)
	13	+|7|NRST|Negative reset which can be connected to a button (Connected to +3V3)
	14	+|8|PA0|Current 6 Supply 24V resserve
	15	+|9|PA1|Current 7 Supply 24V resserve
	16	+|10|PA2|Current 5 Supply sensor card
	17	+|11|PA3|Current 4 Supply front
	18	+|12|PA4|Current 3 Supply accumulator
	19	+|13|PA5|Current 2 Supply fans
	20	+|14|PA6|LED 9
	21	+|15|PA7|LED 2
	22	+|16|PB0|Current 8 Supply buzzer, brake light
	23	+|17|PB1|PWM enable Fan 1
	24	+|18|PB2|V-sense
	25	+|19|VSSA|Voltage source: Ground
	26	+|20|VREF|Voltage reference (connected to +3V3)??
	27	+|21|VDDA|Voltage source: Power (+3V3)
	28	+|22|PB10|LED 8
	29	+|23|VSS|Voltage source: Ground
	30	+|24|VDD|Voltage source: Power (+3V3)
	31	+|25|PB11|Current 1 Internal components
	32	+|26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger
	33	+|29|PB15|PWM fan
	34	+|30|PA8|Enable buzzeer
	35	+|31|PA9|Enable brake light
	36	+|32|PA10|ASMS signal
	37	+|33|PA11|CAN bus RXD
	38	+|34|PA12|CAN bus TXD
	39	+|35|VSS|Voltage source: Ground
	40	+|36|VDD|Voltage source: Power (+3V3)
	41	+|37|PA13|SWDIO
	42	+|38|PA14|SWCLK
	43	+|40|PB3|LED 3
	44	+|41|PB4|LED 4
	45	+|42|PB5|LED 5
	46	+|43|PB6|Enable Pump 1
	47	+|44|PB7|Enable Pump 2
	48	+|45|PB8|LED 6
	49	+|46|PB9|LED 7
	50	+|47|VSS|Voltage source: Ground
	51	+|48|VDD|Voltage source: Power (+3V3)
	52	+
5	5