Changes for page Power controller

Last modified by Mathias Larsen on 2026/09/24 21:21

From version 5.1

edited by Mathias Larsen
on 2026/05/24 17:56

Change comment: There is no comment for this version

To version 2.4

edited by Mathias Larsen
on 2026/05/24 15:18

Change comment: There is no comment for this version

Summary

Page properties

Content

@@ -1,46 +1,34 @@
  |=Physical pin|=Electrical pin|=(((
  Description
  )))
--|1|VBAT|Power source from a backup battery if a RTC would be used (Connected to +3V3 in this case)
--|5|OSC_IN|Clock input (8MHz oscillator)
--|7|NRST|Negative reset which can be connected to a button (Connected to +3V3)
--|8|PA0|Current 6
--|9|PA1|Current 7
--|10|PA2|Current 5
--|11|PA3|Current 4
--|12|PA4|Current 3
--|13|PA5|Current 2
--|14|PA6|LED 9
--|15|PA7|LED 2
--|16|PB0|Current 8
--|17|PB1|PWM enable Fan
--|18|PB2|V-sense
--|19|VSSA|Voltage source: Ground
--|20|VREF|Voltage reference (connected to +3V3)
--|21|VDDA|Voltage source: Power (+3V3)
--|22|PB10|LED 8
--|23|VSS|Voltage source: Ground
--|24|VDD|Voltage source: Power (+3V3)
--|25|PB11|Current 1
--|26|PB12|Current 9
--|29|PB15|PWM fan
--|30|PA8|Enable buzzeer
--|31|PA9|Enable buzzer
--|32|PA10|ASMS signal
--|33|PA11|CAN bus RXD
--|34|PA12|CAN bus TXD
--|35|VSS|Voltage source: Ground
--|36|VDD|Voltage source: Power (+3V3)
--|37|PA13|SWDIO
--|38|PA14|SWCLK
--|40|PB3|LED 3
--|41|PB4|LED 4
--|42|PB5|LED 5
--|43|PB6|Enable Pump 1
--|44|PB7|Enable Pump 2
--|45|PB8|LED 6
--|46|PB9|LED 7
--|47|VSS|Voltage source: Ground
--|48|VDD|Voltage source: Power (+3V3)
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |
++| | |