Changes for page Power controller

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,3 +1,10 @@
	1	+
	2	+
	3	+== Microcontroller Pinout ==
	4	+
	5	+The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
	6	+
	7	+
1	1	|=Physical pin|=Electrical pin|=(((
2	2	Description
3	3	)))
...	...	@@ -4,28 +4,28 @@
4	4	|1|VBAT|Power source from a backup battery if a RTC would be used (Connected to +3V3 in this case)
5	5	|5|OSC_IN|Clock input (8MHz oscillator)
6	6	|7|NRST|Negative reset which can be connected to a button (Connected to +3V3)
7		-|8|PA0|Current 6
8		-|9|PA1|Current 7
9		-|10|PA2|Current 5
10		-|11|PA3|Current 4
11		-|12|PA4|Current 3
12		-|13|PA5|Current 2
	14	+|8|PA0|Current 6 Supply 24V resserve
	15	+|9|PA1|Current 7 Supply 24V resserve
	16	+|10|PA2|Current 5 Supply sensor card
	17	+|11|PA3|Current 4 Supply front
	18	+|12|PA4|Current 3 Supply accumulator
	19	+|13|PA5|Current 2 Supply fans
13	13	|14|PA6|LED 9
14	14	|15|PA7|LED 2
15		-|16|PB0|Current 8
16		-|17|PB1|PWM enable Fan
	22	+|16|PB0|Current 8 Supply buzzer, brake light
	23	+|17|PB1|PWM enable Fan 1
17	17	|18|PB2|V-sense
18	18	|19|VSSA|Voltage source: Ground
19		-|20|VREF|Voltage reference (connected to +3V3)
	26	+|20|VREF|Voltage reference (connected to +3V3)??
20	20	|21|VDDA|Voltage source: Power (+3V3)
21	21	|22|PB10|LED 8
22	22	|23|VSS|Voltage source: Ground
23	23	|24|VDD|Voltage source: Power (+3V3)
24		-|25|PB11|Current 1
25		-|26|PB12|Current 9
	31	+|25|PB11|Current 1 Internal components
	32	+|26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger
26	26	|29|PB15|PWM fan
27	27	|30|PA8|Enable buzzeer
28		-|31|PA9|Enable buzzer
	35	+|31|PA9|Enable brake light
29	29	|32|PA10|ASMS signal
30	30	|33|PA11|CAN bus RXD
31	31	|34|PA12|CAN bus TXD