Changes for page Power controller

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -2,6 +2,9 @@
2	2
3	3	== Microcontroller Pinout ==
4	4
	5	+The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
	6	+
	7	+
5	5	|=Physical pin|=Electrical pin|=(((
6	6	Description
7	7	)))
...	...	@@ -8,25 +8,25 @@
8	8	|1|VBAT|Power source from a backup battery if a RTC would be used (Connected to +3V3 in this case)
9	9	|5|OSC_IN|Clock input (8MHz oscillator)
10	10	|7|NRST|Negative reset which can be connected to a button (Connected to +3V3)
11		-|8|PA0|Current 6
12		-|9|PA1|Current 7
13		-|10|PA2|Current 5
14		-|11|PA3|Current 4
15		-|12|PA4|Current 3
16		-|13|PA5|Current 2
17		-|14|PA6|LED 9
18		-|15|PA7|LED 2
19		-|16|PB0|Current 8
20		-|17|PB1|PWM enable Fan
21		-|18|PB2|V-sense
	14	+|8|PA0|Analog signal: Current 6 Supply 24V resserve
	15	+|9|PA1|Analog signal: Current 7 Supply 24V resserve
	16	+|10|PA2|Analog signal: Current 5 Supply sensor card
	17	+|11|PA3|Analog signal: Current 4 Supply front
	18	+|12|PA4|Analog signal: Current 3 Supply accumulator
	19	+|13|PA5|Analog signal: Current 2 Supply fans
	20	+|14|PA6|Digital output LED 9
	21	+|15|PA7|Digital output LED 2
	22	+|16|PB0|Analog signal Current 8 Supply buzzer, brake light
	23	+|17|PB1|PWM enable Fan 1
	24	+|18|PB2|Analog input: V-sense
22	22	|19|VSSA|Voltage source: Ground
23	23	|20|VREF|Voltage reference (connected to +3V3)??
24	24	|21|VDDA|Voltage source: Power (+3V3)
25		-|22|PB10|LED 8
	28	+|22|PB10|Digital ouLED 8
26	26	|23|VSS|Voltage source: Ground
27	27	|24|VDD|Voltage source: Power (+3V3)
28		-|25|PB11|Current 1
29		-|26|PB12|Current 9
	31	+|25|PB11|Current 1 Internal components
	32	+|26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger
30	30	|29|PB15|PWM fan
31	31	|30|PA8|Enable buzzeer
32	32	|31|PA9|Enable brake light