Changes for page Power controller

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -11,29 +11,29 @@
11	11	|1|VBAT|Power source from a backup battery if a RTC would be used (Connected to +3V3 in this case)
12	12	|5|OSC_IN|Clock input (8MHz oscillator)
13	13	|7|NRST|Negative reset which can be connected to a button (Connected to +3V3)
14		-|8|PA0|Current 6 Supply 24V resserve
15		-|9|PA1|Current 7 Supply 24V resserve
16		-|10|PA2|Current 5 Supply sensor card
17		-|11|PA3|Current 4 Supply front
18		-|12|PA4|Current 3 Supply accumulator
19		-|13|PA5|Current 2 Supply fans
20		-|14|PA6|LED 9
21		-|15|PA7|LED 2
22		-|16|PB0|Current 8 Supply buzzer, brake light
	14	+|8|PA0|Analog signal: Current 6 Supply 24V resserve
	15	+|9|PA1|Analog signal: Current 7 Supply 24V resserve
	16	+|10|PA2|Analog signal: Current 5 Supply sensor card
	17	+|11|PA3|Analog signal: Current 4 Supply front
	18	+|12|PA4|Analog signal: Current 3 Supply accumulator
	19	+|13|PA5|Analog signal: Current 2 Supply fans
	20	+|14|PA6|Digital output LED 9
	21	+|15|PA7|Digital output LED 2
	22	+|16|PB0|Analog signal Current 8 Supply buzzer, brake light
23	23	|17|PB1|PWM enable Fan 1
24		-|18|PB2|V-sense
	24	+|18|PB2|Input: V-sense
25	25	|19|VSSA|Voltage source: Ground
26	26	|20|VREF|Voltage reference (connected to +3V3)??
27	27	|21|VDDA|Voltage source: Power (+3V3)
28		-|22|PB10|LED 8
	28	+|22|PB10|Digital output: LED 8
29	29	|23|VSS|Voltage source: Ground
30	30	|24|VDD|Voltage source: Power (+3V3)
31	31	|25|PB11|Current 1 Internal components
32	32	|26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger
33		-|29|PB15|PWM fan
34		-|30|PA8|Enable buzzeer
35		-|31|PA9|Enable brake light
36		-|32|PA10|ASMS signal
	33	+|29|PB15|PWM enable fan 2
	34	+|30|PA8|Digital output Enable buzzeer
	35	+|31|PA9|Digital output Enable brake light
	36	+|32|PA10|Input ASMS signal
37	37	|33|PA11|CAN bus RXD
38	38	|34|PA12|CAN bus TXD
39	39	|35|VSS|Voltage source: Ground