Changes for page Power controller

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,10 +8,3 @@
1		-
2		-
3		-== Microcontroller Pinout ==
4		-
5		-The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
6		-
7		-
8	8	|=Physical pin|=Electrical pin|=(((
9	9	Description
10	10	)))
...	...	@@ -11,16 +11,16 @@
11	11	|1|VBAT|Power source from a backup battery if a RTC would be used (Connected to +3V3 in this case)
12	12	|5|OSC_IN|Clock input (8MHz oscillator)
13	13	|7|NRST|Negative reset which can be connected to a button (Connected to +3V3)
14		-|8|PA0|Analog signal: Current 6 Supply 24V resserve
15		-|9|PA1|Analog signal: Current 7 Supply 24V resserve
16		-|10|PA2|Analog signal: Current 5 Supply sensor card
17		-|11|PA3|Analog signal: Current 4 Supply front
18		-|12|PA4|Analog signal: Current 3 Supply accumulator
19		-|13|PA5|Analog signal: Current 2 Supply fans
	7	+|8|PA0|Current 6
	8	+|9|PA1|Current 7
	9	+|10|PA2|Current 5
	10	+|11|PA3|Current 4
	11	+|12|PA4|Current 3
	12	+|13|PA5|Current 2
20	20	|14|PA6|LED 9
21	21	|15|PA7|LED 2
22		-|16|PB0|Current 8 Supply buzzer, brake light
23		-|17|PB1|PWM enable Fan 1
	15	+|16|PB0|Current 8
	16	+|17|PB1|PWM enable Fan
24	24	|18|PB2|V-sense
25	25	|19|VSSA|Voltage source: Ground
26	26	|20|VREF|Voltage reference (connected to +3V3)??
...	...	@@ -28,8 +28,8 @@
28	28	|22|PB10|LED 8
29	29	|23|VSS|Voltage source: Ground
30	30	|24|VDD|Voltage source: Power (+3V3)
31		-|25|PB11|Current 1 Internal components
32		-|26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger
	24	+|25|PB11|Current 1
	25	+|26|PB12|Current 9
33	33	|29|PB15|PWM fan
34	34	|30|PA8|Enable buzzeer
35	35	|31|PA9|Enable brake light