Changes for page Power controller

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -1,53 +8,46 @@
1		-
2		-
3		-== Microcontroller Pinout ==
4		-
5		-The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
6		-
7		-
8	8	|=Physical pin|=Electrical pin|=(((
9	9	Description
10	10	)))
11		-|1|VBAT|Power source from a backup battery if a RTC would be used (Connected to +3V3 in this case)
12		-|5|OSC_IN|Clock input (8MHz oscillator)
13		-|7|NRST|Negative reset which can be connected to a button (Connected to +3V3)
14		-|8|PA0|Analog signal: Current 6 Supply 24V resserve
15		-|9|PA1|Analog signal: Current 7 Supply 24V resserve
16		-|10|PA2|Analog signal: Current 5 Supply sensor card
17		-|11|PA3|Analog signal: Current 4 Supply front
18		-|12|PA4|Analog signal: Current 3 Supply accumulator
19		-|13|PA5|Analog signal: Current 2 Supply fans
20		-|14|PA6|Digital output LED 9
21		-|15|PA7|Digital output LED 2
22		-|16|PB0|Analog signal Current 8 Supply buzzer, brake light
23		-|17|PB1|PWM enable Fan 1
24		-|18|PB2|Input: V-sense
25		-|19|VSSA|Voltage source: Ground
26		-|20|VREF|Voltage reference (connected to +3V3)??
27		-|21|VDDA|Voltage source: Power (+3V3)
28		-|22|PB10|Digital output: LED 8
29		-|23|VSS|Voltage source: Ground
30		-|24|VDD|Voltage source: Power (+3V3)
31		-|25|PB11|Current 1 Internal components
32		-|26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger
33		-|29|PB15|PWM enable fan 2
34		-|30|PA8|Digital output Enable buzzeer
35		-|31|PA9|Digital output Enable brake light
36		-|32|PA10|Input ASMS signal
37		-|33|PA11|CAN bus RXD
38		-|34|PA12|CAN bus TXD
39		-|35|VSS|Voltage source: Ground
40		-|36|VDD|Voltage source: Power (+3V3)
41		-|37|PA13|SWDIO
42		-|38|PA14|SWCLK
43		-|40|PB3|LED 3
44		-|41|PB4|LED 4
45		-|42|PB5|LED 5
46		-|43|PB6|Enable Pump 1
47		-|44|PB7|Enable Pump 2
48		-|45|PB8|LED 6
49		-|46|PB9|LED 7
50		-|47|VSS|Voltage source: Ground
51		-|48|VDD|Voltage source: Power (+3V3)
	4	+|1|VBAT|
	5	+|5|OSC_IN|
	6	+|7|NRST|
	7	+|8|PA0|
	8	+|9|PA1|
	9	+|10|PA2|
	10	+|11|PA3|
	11	+|12|PA4|
	12	+|13|PA5|
	13	+|14|PA6|
	14	+|15|PA7|
	15	+|16|PB0|
	16	+|17|PB1|
	17	+|18|PB2|
	18	+|19|VSSA|
	19	+|20|VREF|
	20	+|21|VDDA|
	21	+|22|PB10|
	22	+|23|VSS|
	23	+|24|VDD|
	24	+|25|PB11|
	25	+|26|PB12|
	26	+|29|PB15|
	27	+|30|PA8|
	28	+|31|PA9|
	29	+|32|PA10|
	30	+|33|PA11|
	31	+|34|PA12|
	32	+|35|VSS|
	33	+|36|VDD|
	34	+|37|PA13|
	35	+|38|PA14|
	36	+|40|PB3|
	37	+|41|PB4|
	38	+|42|PB5|
	39	+|43|PB6|
	40	+|44|PB7|
	41	+|45|PB8|
	42	+|46|PB9|
	43	+|47| |
	44	+|48| |
52	52
53	53