Skip to Content

Changes for page Power controller

Last modified by Mathias Larsen on 2026/09/24 21:21
From version 7.4
edited by Mathias Larsen
on 2026/05/25 12:08
Change comment: There is no comment for this version
To version 6.2
edited by Mathias Larsen
on 2026/05/25 10:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,9 +2,6 @@
2 2  
3 3  == Microcontroller Pinout ==
4 4  
5 -The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
6 -
7 -
8 8  |=Physical pin|=Electrical pin|=(((
9 9  Description
10 10  )))
... ... @@ -11,29 +11,29 @@
11 11  |1|VBAT|Power source from a backup battery if a RTC would be used (Connected to +3V3 in this case)
12 12  |5|OSC_IN|Clock input (8MHz oscillator)
13 13  |7|NRST|Negative reset which can be connected to a button (Connected to +3V3)
14 -|8|PA0|Analog signal: Current 6 Supply 24V resserve
15 -|9|PA1|Analog signal: Current 7 Supply 24V resserve
16 -|10|PA2|Analog signal: Current 5 Supply sensor card
17 -|11|PA3|Analog signal: Current 4 Supply front
18 -|12|PA4|Analog signal: Current 3 Supply accumulator
19 -|13|PA5|Analog signal: Current 2 Supply fans
20 -|14|PA6|Digital output LED 9
21 -|15|PA7|Digital output LED 2
22 -|16|PB0|Analog signal Current 8 Supply buzzer, brake light
23 -|17|PB1|PWM enable Fan 1
24 -|18|PB2|Input: V-sense
11 +|8|PA0|Current 6
12 +|9|PA1|Current 7
13 +|10|PA2|Current 5
14 +|11|PA3|Current 4
15 +|12|PA4|Current 3
16 +|13|PA5|Current 2
17 +|14|PA6|LED 9
18 +|15|PA7|LED 2
19 +|16|PB0|Current 8
20 +|17|PB1|PWM enable Fan
21 +|18|PB2|V-sense
25 25  |19|VSSA|Voltage source: Ground
26 26  |20|VREF|Voltage reference (connected to +3V3)??
27 27  |21|VDDA|Voltage source: Power (+3V3)
28 -|22|PB10|Digital output: LED 8
25 +|22|PB10|LED 8
29 29  |23|VSS|Voltage source: Ground
30 30  |24|VDD|Voltage source: Power (+3V3)
31 -|25|PB11|Current 1 Internal components
32 -|26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger 
33 -|29|PB15|PWM enable fan 2
34 -|30|PA8|Digital output Enable buzzeer
35 -|31|PA9|Digital output Enable brake light
36 -|32|PA10|Input ASMS signal
28 +|25|PB11|Current 1
29 +|26|PB12|Current 9
30 +|29|PB15|PWM fan
31 +|30|PA8|Enable buzzeer
32 +|31|PA9|Enable brake light
33 +|32|PA10|ASMS signal
37 37  |33|PA11|CAN bus RXD
38 38  |34|PA12|CAN bus TXD
39 39  |35|VSS|Voltage source: Ground