Changes for page Power controller

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -2,7 +2,7 @@
2	2
3	3	== Microcontroller Pinout ==
4	4
5		-The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
	5	+The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6
6	6
7	7
8	8	|=Physical pin|=Electrical pin|=(((
...	...	@@ -31,21 +31,23 @@
31	31	|25|PB11|Current 1 Internal components
32	32	|26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger
33	33	|29|PB15|PWM: enable fan 2
34		-|30|PA8|Digital output Enable buzzeer
35		-|31|PA9|Digital output Enable brake light
	34	+|30|PA8|Digital output Enable buzzeer(On the car it is Brake light)
	35	+|31|PA9|(((
	36	+Digital output Enable brake light(On the car it is the buzzer)
	37	+)))
36	36	|32|PA10|Input ASMS signal
37		-|33|PA11|CAN bus RXD
38		-|34|PA12|CAN bus TXD
	39	+|33|PA11|CAN-BUS RXD
	40	+|34|PA12|CAN-BUS TXD
39	39	|35|VSS|Voltage source: Ground
40	40	|36|VDD|Voltage source: Power (+3V3)
41	41	|37|PA13|SWDIO
42	42	|38|PA14|SWCLK
43		-|40|PB3|LED 3
44		-|41|PB4|LED 4
45		-|42|PB5|LED 5
46		-|43|PB6|Enable Pump 1
47		-|44|PB7|Enable Pump 2
48		-|45|PB8|LED 6
	45	+|40|PB3|Digital output: LED 3
	46	+|41|PB4|Digital output: LED 4
	47	+|42|PB5|Digital output: LED 5
	48	+|43|PB6|Digital output: Enable Pump 1
	49	+|44|PB7|Digital output: Enable Pump 2
	50	+|45|PB8|Digital output: LED 6
49	49	|46|PB9|LED 7
50	50	|47|VSS|Voltage source: Ground
51	51	|48|VDD|Voltage source: Power (+3V3)