Skip to Content

Changes for page Power controller

Last modified by Mathias Larsen on 2026/09/24 21:21
From version 9.2
edited by Mathias Larsen
on 2026/05/25 13:23
Change comment: There is no comment for this version
To version 13.1
edited by Mathias Larsen
on 2026/06/17 16:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,7 +2,7 @@
2 2  
3 3  == Microcontroller Pinout ==
4 4  
5 -The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6 D
5 +The power controller uses a microcontroller to control the pumps, fans, buzzer, and brake light. It also features current monitoring and LED indicators. The Microcontroller used in this system is STM32G431CBT6
6 6  
7 7  
8 8  |=Physical pin|=Electrical pin|=(((
... ... @@ -31,11 +31,13 @@
31 31  |25|PB11|Current 1 Internal components
32 32  |26|PB12|Current 9 Supply 12 V Pumps inverter and datalogger 
33 33  |29|PB15|PWM: enable fan 2
34 -|30|PA8|Digital output Enable buzzeer
35 -|31|PA9|Digital output Enable brake light
34 +|30|PA8|Digital output Enable buzzeer(On the car it is Brake light)
35 +|31|PA9|(((
36 +Digital output Enable brake light(On the car it is the buzzer)
37 +)))
36 36  |32|PA10|Input ASMS signal
37 -|33|PA11|CAN bus RXD
38 -|34|PA12|CAN bus TXD
39 +|33|PA11|CAN-BUS RXD
40 +|34|PA12|CAN-BUS TXD
39 39  |35|VSS|Voltage source: Ground
40 40  |36|VDD|Voltage source: Power (+3V3)
41 41  |37|PA13|SWDIO
... ... @@ -43,7 +43,7 @@
43 43  |40|PB3|Digital output: LED 3
44 44  |41|PB4|Digital output: LED 4
45 45  |42|PB5|Digital output: LED 5
46 -|43|PB6|Digital outpEnable Pump 1
48 +|43|PB6|Digital output: Enable Pump 1
47 47  |44|PB7|Digital output: Enable Pump 2
48 48  |45|PB8|Digital output: LED 6
49 49  |46|PB9|LED 7